Taiwan NCC Certification Introduction
NCC is the abbreviation of The National Communications Commission, which mainly controls communication information equipment circulating and used in the Taiwan market:
1. LPE: Low Power Equipment is a low-power device (for example, Bluetooth, WIFI-type devices);
2. TTE: Telecommunications Terminal Equipment is a communication terminal device (for example, mobile phones, tablet devices).
NCC certified product range
1. Low-power RF motors operating at frequencies from 9 kHz to 300 GHz, such as wireless network (WLAN) products (including IEEE 802.11a/b/g), UNII, Bluetooth products, RFID, ZigBee, wireless keyboards, wireless mice , wireless headset microphone, radio, radio remote control toys, various radio remote controls, all kinds of wireless alarms.
2. Public switched telephone network equipment (PSTN) products, such as wired telephones (including VOIP Internet telephony), automatic alarm equipment, telephone answering machines, fax machines, remote control devices, wired telephone wireless main and auxiliary machines, and key telephone systems , data equipment (including ADSL equipment), incoming display terminal equipment, 2.4GHz radio frequency telecommunications terminal equipment.
3. Land Mobile Communication Network Equipment (PLMN) products, such as wireless broadband access mobile station equipment (WiMAX mobile terminal equipment), GSM 900/DCS 1800 mobile telephones and terminal equipment (2G mobile phones), third generation mobile communication terminals Equipment (3G mobile phone), etc.
NCC certification mark ratio description
1. It should be marked or printed on the position of the device body in an appropriate proportion. There is no maximum/minimum size specification, and the principle is clear.
2. This NCC logo, together with the verification pass number, shall be attached to the product as required. The frequency is single and must be clear and easily identifiable.
Verification of qualified label production examples
In order to meet the needs of Taiwan's trade facilitation and customs clearance, the revised conformity label pattern for telecommunications-controlled radio frequency equipment and telecommunications terminal equipment will be revised as follows from January 1, 1995: low-power RF motors that have passed the verification number before December 31, 1994. And wireless telecommunication terminal equipment, if you need to convert the verification pass number into the 95 new code type (pass code).
NCC certification process
1. The entrusting party provides product information to the organization to evaluate the quotation;
2. The entrusting party confirms the return of the quotation, fills in the application form, provides samples, materials, arranges the payment (the first paragraph), and opens the case;
3. Arrange product forecasts and review data;
4. If there is any problem with the test and data, arrange rectification and retesting until qualified;
5. After the test and the data are qualified, the issuing authority will conduct a witness test;
6. After the witness test is completed, the issuing authority issues a test report and issues a certificate;
7. The entrusting party pays the money (the last paragraph), gets the certificate report, and closes the case.
Apply for Taiwan NCC Certification Preparation Information
1. Product circuit schematic diagram;
2. Product block diagram;
3. Product specifications;
4. Product specification;
5. BOM table;
6. Service application form;
7. Factory ISO9001 certificate;
8. Antenna specifications.
NCC certification application period
The NCC certification application period is 3-4 weeks, and the fee can be determined based on the product data.
NCC factory inspection and certificate validity period
NCC certification has no factory inspection, the certificate has no expiration date, as long as the product has no change, the test standard is not updated, and the certificate is always valid.
Comparative Analysis of Taiwan NCC Certification and BSMI Certification
Shenzhen NCC certification agency
As a professional third-party testing organization and NCC certification agency, FCS not only has independent laboratories and a group of experienced NCC certified engineers, but also provides a full range of NCC certification services for customers. Sign a mutual recognition agreement and issue a report (or certificate) that complies with Taiwan's testing standards and eliminates barriers to your product's export trade. If you have relevant NCC certification testing requirements, please contact us at 0769-27280901, we sincerely welcome you to visit our company.
Contact us
WeChat Consulting
No public
About us
Laboratory
News